Sunday, June 26, 2011

Got some

supplies in (epoxy mostly) so it was back to boat building this morning.

Frames A and B glassed.

Frame A (shield shape) will face into the anchor locker. The reverse side will get a lighter fabric because it'll face into the v-berth.

This is the heavy 33 oz/yd Vectorply that caused us difficulty before. This time I really soaked the ply first and gave it some time to setup a bit. Then we hit it with lots of epoxy and let it soak in. It takes a lot longer to thoroughly wet out this heavy stuff. Patience is definitely required when working with this stuff.

We'll see how it goes tomorrow when the peel ply comes off.